In finding out for your CCNA Test and making ready to gain this precious certification, you could be tempted to spend little time researching static routing http://edition.cnn.com/search/?text=토토사이트 and head suitable for the greater enjoyable dynamic routing protocols like RIP, EIGRP, and OSPF. This really is an easy to understand miscalculation, but nevertheless a oversight. Static routing is just not sophisticated, but it’s a significant topic around the CCNA Test and also a worthwhile talent for actual-globe networking.
To develop static routes on the Cisco router, you employ the ip route command accompanied by the place network, community mask, and possibly another-hop IP deal with or maybe the local exit interface. It’s critical to keep that past component in mind – you’re either configuring the IP tackle on the downstream router, or the interface on the local router which will serve as the exit interface.
Enable’s say your local router provides a serial0 interface having an IP address of 200.one.1.one/thirty, along with the downstream router that will be the upcoming hop will obtain packets on its serial1 interface by having an IP handle of two hundred.1.1.two/thirty. The static route are going to be for packets destined with the 172.10.one.0 network. Either of the next ip route statements might be right.
R1(config)#ip route 172.ten.1.0 255.255.255.0 200.one.one.2 (next-hop IP tackle)
OR
R1(config)#ip route 172.ten.1.0 255.255.255.0 serial0 ( neighborhood exit interface)
You can also write a static route that matches only one vacation spot. This is a host route, and it has 255.255.255.255 for your mask. If the above static routes really should only be used to send packets to 172.ten.1.1., the subsequent commands 안전놀이터 would do The task.
R1(config)#ip route 172.10.one.one 255.255.255.255 200.1.one.2 (up coming-hop IP handle)
R1(config)#ip route 172.10.one.one 255.255.255.255 serial0 ( community exit interface)
At last, a default static route serves as being a gateway of past vacation resort. If there isn't any matches for your place in the routing table, the default route are going to be employed. Default routes use all zeroes for the two the desired destination and mask, and all over again a upcoming-hop IP deal with or area exit interface can be utilized.
R1(config)#ip route 0.0.0.0 0.0.0.0 200.one.one.2 (subsequent-hop IP deal with)
R1(config)#ip route 0.0.0.0 0.0.0.0 serial0 ( local exit interface)
IP route statements feel basic enough, but the main points regarding the up coming-hop IP deal with, the neighborhood exit interface, default static routes, and the syntax from the command are critical for success on CCNA Test working day and in the true planet.